18 March 2007

First Block Step By Step

TheBlocks

These are the four blocks for my iceberg print. Sometime I'll talk about ways to color separate an image, but since I've already designed this print and carved the blocks, let's just talk about printing for now.

Setup

This is the basic setup. The block is on a piece of non-skid shelf liner to keep it very stable, the damp paper is under plastic close to the block so it's easy to pick it up and get it right into position, and the baren, ink and paste are on a taboret to my right (I'm right-handed).

Generally, it's good to print colors in order from light to dark. From experience, I also know that the first impression tends to be the most grainy impression, so I want to choose my first block with that in mind as well. I'd like the iceberg itself to have some texture, so I'll print the pale iceberg color first.

1_WaterOnBlock

I begin by wetting the block with a spritzer and wetting the brush by rubbing it on the block. Then I wait a couple of minutes, letting the water soak in a bit. Sometimes I do this more than once.

2_PasteOnBlock

Next I apply a little rice paste, letting it drop onto the block from the end of a Japanese brush. Literally a drop or two is all that I need for this block.

3_InkOnBlock

And since I want this to be a pale tint, I use only a couple of drops of pigment as well.

4_Mixing

The pigment and paste are blended with the maru bake (brush) right on the block and then smoothed out with a few long strokes.

5_SettingThePaper

Grasping the paper with the first and second fingers of each hand, like scissors, the thumbs guide the paper's edges into the carved kento marks which act as registration marks. Once the corner and edge are in position, the "scissor grip" is released so the paper can gently fall onto the inked block.

6_Burnishing

The print is then burnished with a baren. Here I'm using a ball-bearing baren, my favorite kind. I like to use a protective paper, called an ategawa, to protect the paper and also to protect the baren from stray paper fibers. I use baking parchment paper as an ategawa.

7_BleedThroughBack

After the burnishing is finished, there is a little bleed through on the back of the print. This is normal in moku hanga.

8_LiftingPaper
9_FirstImpression

Lift the paper carefully, and there it is, the first impression. I then do the same steps over again. And over again. And over again, until I've done all 18 sheets of paper.

I'll make the other impressions in the next couple of days.

8 comments:

Cin said...

hi Annie

a terrific post, it's fun to see the steps in such detail, I'm surprised to see how very little pigment is applied! looking forward to more

BZ said...
This comment has been removed by a blog administrator.
Ellen Shipley said...

Hi Annie,

This is just great. Just like being back at the Baren Summit this summer. 8-]

Thanx for taking all those pictures!

Amanda said...

This is soooo good. Wonderful for a total novice to see, especially when I've never heard of a moku hanga workshop in Australia, let alone Brisbane. I would never expect to use so little paste or pigment. Maybe I will pluck up the courage to give it a try next year after I finish my studies.

Diane Cutter said...

Thanks for the very clear step by step tutorial. I'm sending people your way!

Lesley Todd said...

This is fascinating. Thank you for sharing your process. I'm really looking forward to seeing the next installment.

Andy English said...

I'm always fascinated by step-by-step demonstrations. I really must free up some time to make a hanga print. Looking forwards to the next colour!

Marissa L. Swinghammer said...

Your demo makes me a little less scared to try moku hanga. I still hesitate about the investment of even more supplies though. But maybe someday. I love how delicate the colors are.